Asphalt & Paving Estimating in Denton, TX

Tonnage calculated from actual area, depth, and mix density - not a rounded square-footage number that drifts further from reality as the paved area gets larger.

Asphalt tonnage is a compounding number: a small error in area or lift depth on a driveway is a rounding error, but the same percentage error on a multi-acre parking lot or a mile of roadway becomes a real material shortfall or overage, either of which shows up as a change order on the job or margin lost eating the difference. Texas paving work also isn't priced off a single generic mix - TxDOT Item 340 (dense-graded hot-mix asphalt) and Item 341 specify Superpave mix designs and PG (performance-grade) binder grades matched to Texas's climate and traffic loading, and the binder grade alone materially affects material cost, so an estimate that treats "asphalt" as one commodity price is already off before the tonnage math even starts.

Our asphalt and paving estimating calculates tonnage from real measured area and specified lift depth, and prices to the actual mix design and binder grade the project calls for.

• Surface area - paved area measured directly from site plans in square yards, broken out by section where different pavement thicknesses or mix designs apply (drive lanes versus parking stalls, for example).
• Tonnage by lift - hot-mix tonnage calculated per lift (base/binder course and surface course) from area, specified depth, and mix density - not a single blended depth applied across the whole lot.
• Base course - aggregate base and subbase material and compaction requirements priced separately from the asphalt surface itself.
• Milling and overlay - for resurfacing work, milling depth and disposal quantities, plus overlay tonnage, priced as distinct scope from new-construction paving.
• Striping and markings - parking stall striping, ADA-compliant accessible space markings and signage, and directional markings, quantified by linear footage and count.
• Curbing and edge treatments - concrete curb, curb and gutter, or asphalt edge treatments, quantified separately by linear footage.

Commercial parking lots. Full-depth new construction or mill-and-overlay resurfacing, striped and marked to current ADA accessibility requirements.

Residential and light-duty paving. Driveways and low-traffic access roads, typically single-lift asphalt over a lighter base section than commercial or roadway work requires.

TxDOT and municipal roadway. Paving quantified to TxDOT Item 340/341 specifications, with mix design and binder grade specified per the project's traffic and climate classification, formatted for public-bid submittal.

Not every Texas asphalt project uses the same binder grade - PG 64-22 is common for lower-traffic applications, while higher-traffic roadway and commercial work often specifies a stiffer binder like PG 70-22 to resist rutting under Texas summer pavement temperatures, and the binder grade specified is a direct cost input, not a footnote. Pricing an asphalt estimate against a single blended "asphalt per ton" rate without confirming the specified mix design and binder grade is one of the more common ways a paving bid comes in wrong, particularly on public and higher-traffic commercial work where the spec explicitly calls for a specific PG grade.

Paving takeoffs are measured in Bluebeam, with tonnage calculated from measured area, specified lift depth, and mix density, cross-referenced against TxDOT Item 340/341 (Superpave hot-mix asphalt) specifications where applicable, and priced with current RSMeans and Texas material/labor rates.

Tonnage math looks simple until mix design, lift depth, and binder grade all factor in - and a small measurement or density error compounds fast on a large paved area. Our estimators price to the actual specified mix, not a blended average.

Denton is a vibrant university city anchored by the University of North Texas (UNT) and Texas Woman's University (TWU), while simultaneously serving as the county seat for one of the fastest-growing counties in America. The construction market is a compelling mix of institutional higher-education projects, historic downtown square preservation, and explosive residential and commercial expansion radiating outward along I-35W and I-35E.

Estimating in Denton requires understanding the city's dual identity: pricing carefully controlled historic renovation work around the courthouse square, while also competitively estimating the high-volume suburban construction (apartments, retail, and single-family) pushing north toward Sanger and Aubrey. The A-train DCTA commuter rail also fuels transit-oriented development near stations, creating a growing demand for mixed-use projects.

The City of Denton Development Services Department manages permits with distinct processes for different zones. The Downtown Denton Historic District is governed by strict preservation standards that can mandate specific materials and architectural treatments. Outside the historic core, Denton enforces suburban development codes including masonry requirements, extensive landscaping ordinances, and tree preservation rules. Our estimates capture these location-specific compliance costs, whether your project is a downtown renovation or a greenfield development on the city's expanding periphery.